HS-322HD Standard Heavy Duty Servo Motor 0.19sec/60 3kg/cmThe HS-322HD Standard Heavy Duty Servo utilizes Hitec's revolutionary Karbonite gear train which is four times stronger than the standard white nylon gears. Even after hundreds of thousands of cycles, they don't show any signs of wear. Karbonite gears and a custom IC make the HS-322HD a great choice for an economical sport servo. Applications:Heli's and Aircraft up to 72" or up to 12lbs when using just one servo per control surface. Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications, even if under 12lbs. WARNING: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail. Specifications: Motor type: 3 Pole Control system: pulse width control 1500Amicrosec neutral Dead Band Width: 5usec Operating Angle: 40 Deg. one side pulse traveling 400usec Direction: Clockwise/Pulse Traveling 1500 to 1900usec (0 - 180) Stall torque @ 4.8V: 3 kg.cm Idle current: 7.4mA @ stopped Operating voltage range: 4.8V to 6.0V Operating speed @ 4.8V: 0.19sec/600 @ no load Running current @ 4.8V: 160mA/600 @ no load Nylon bearing w/ 24 segment gear spline Continuous Rotation Modifiable: Yes Size: 1.57" x 0.78" x 1.43" Weight: 1.51 oz.Find out more about how servo motors work.
|
