WaterSafe Drinking Water Test for Bacteria
Check for the presence of coliform bacteria in your drinking water with this do-it-yourself, EPA-based test kit.
Kit Contains One Bacteria Test Vial. Single Use
Keep tests out of reach of children or pets. Do not ingest anything from this test kit. Do not drink water sample
used for testing.
Store and use at room temperature (60-86 F).
Do not use on hot water or water containing bleach detergents. Do not re-use any part of the test kit.
Do not open packets or vial until you are ready to perform the tests. Read and follow all instructions carefully.
AirFilters.com
This is a WaterSafe Drinking Water Test that is a bacteria Check for the presence of coliform bacteria in your drinking water. The kit is a do-it-yourself, EPA-based test kit and contains 1 Bacteria Test Vial.
Keep the Single Use Keep tests out of reach of children or pets. Do not ingest anything from this test kit. Do not drink water sample used for testing. Store and use at room temperature (60-86 F). Do not use on hot water or water containing bleach detergents. Do not re-use any part of the test kit. Do not open packets or vial until you are ready to perform the tests. Read and follow all instructions carefully. After 48 hours, observe the color of the liquid WITHOUT opening the vial: Purple color negative result (no bacteria detected) Yellow color positive result (Highly likely that potentially harmful bacteria detected)
|
